Product Description
ResinForce EasyPoly High Solids SC 3H is a two-component (1:1) high solids, fast cure, VOC compliant, aliphatic polyaspartic topcoat system. It provides outstanding clarity, appearance, high gloss, low odor, UV resistance, and excellent chemical resistance. This fast cure version allows for quicker return-to-service times while maintaining a user-friendly application process. The high solids formulation ensures minimal odor and shrinkage during curing.
Surface Preparation: The concrete surface must be deemed mechanically and structurally sound, thoroughly clean of debris, oils, fats, waxes, sealers, curing agents, and other contamination. New concrete must be fully cured for a minimum of 28 days. Do not apply to wet concrete. Chloride, moisture, and pH levels should be checked prior to application. Mechanically prep the concrete surface by shot blasting or diamond grinding with 30 grit or coarser diamonds to achieve a dust-free CSP-3 profile. Substrate and material temperature should be 59°F - 86°F with a maximum relative humidity of 85%. If applied outside these limits, the coating may have excessive air entrapment, bubbles, blisters, blushing, hazing, curing issues, or adhesion issues.
Mixing: Pre-mix Part A and Part B separately for 1-2 minutes prior to combining components together. Pour 1 part of Part B into 1 part of Part A by volume, then mix with a helix or jiffy mixer for 3 minutes at 300-450 rpm LOW SPEED, scooping sides, bottom, and all around for a uniform mix. Avoid high-speed mixing, which will cause entrapment of air during mixing. Make sure to scrape the walls and bottom of the container with a straight-edged trowel or mixing stick at least once to ensure a homogeneous mix. Do not mix more material than can be applied within working time limits. Immediately pour contents out of the pail onto the floor to begin spreading.
Coverage Rates:
Primer Direct to Concrete: 150 - 265 sq ft per gallon (6-11 mils)
Top Coat over Full Broadcast Flake Floors: 130 - 200 sq ft per gallon (8-12 mils)
Grout Coat over Full Broadcast Quartz: 100 - 150 sq ft per gallon (11-16 mils)
Application: Apply mixed material by pouring onto the surface and spreading with a flat squeegee or small notch squeegee. Then back roll with an 18" lint-free shedless 3/8" nap roller. Avoid creating puddles. Due to the fast cure time, work efficiently to prevent the material from becoming too thick and difficult to apply. If the material begins to thicken and stick to application tools, stop applying and discard the mixed material. Clean up tools and equipment with Xylene.
Recommended Uses:
Ideal for residential garages and basements, restaurants, food prep areas, bars, distilleries, wineries, and breweries, classrooms, laboratories, and mechanical rooms, light manufacturing, storage, and production areas, retail showrooms, sales floors, and waiting rooms, fiberglass, steel, concrete, and wood surfaces, aircraft hangar floors, maintenance facilities, industrial shop floors, car wash bays, and chemical containment areas.
