Product Description
CPS Quake Hard Surface Acid Cleaner and Restorer
1.2 pH Acid Concentrate
Size: 1 Gallon
Professional Restoration Cleaning and/or Etching
Effectively cleans, restores, and surface etches to remove surface stains and discoloration:
- Concrete
- Grout
- Pavers
- Other masonry hard surfaces
- Grout
- Pavers
- Other masonry hard surfaces
Directions for Use:
1. Protect surrounding surfaces including plumbing fixtures, door knobs, light fixtures, appliances, and other metal surfaces or polished stone/concrete. Provide adequate ventilation when using indoors Pre-wet surrounding surfaces with plain water when using outdoors.
2. Mix approximately 4-16 oz of Quake Concentrate per gallon of water in a bucket. Avoid splashing. Wear proper PPE including rubber gloves, eye protection, and other acid proof clothing. For Professional Use Only. Buyer assumes all risk in use and handling.
3. Apply mixture to the surface using a mop, brush, or other direct contact method. Do Not Use a sprayer.
4. Agitate with a hard bristle brush as needed. Dwell times may vary from 5-20 minutes.
5. Rinse thoroughly to neutralize using professional extraction equipment and "spinner" tool when using indoors, or high flow surface cleaner or hose when using outdoors.
6. Allow surface to dry to examine results. Repeat above process as needed.
7. For professional use only. Do not use on polished stone, polished concrete, metal surfaces, fine wood, food prep surfaces, or other delicate surfaces. Always test prior to full use.
For SDS Sheet CLICK HERE
