Product Description
Ameripolish® X-Link E (WL) is a high-gloss, modified urethane sealer designed to give surfaces a vibrant wet look. It’s a durable and breathable coating that maintains its appearance while protecting surfaces from various environmental factors.
Key Features:
- True Wet-Look Finish: Delivers a high-gloss, wet appearance that enhances the surface’s visual appeal.
- Non-Yellowing Formula: Maintains clarity and prevents discoloration over time.
- Breathable: Allows moisture to escape from beneath the surface, reducing the risk of trapping water.
- Fast Drying: Dries quickly, typically within 1 hour, facilitating faster project completion.
- Durable Protection: Provides resistance to oil, chemicals, mildew, and UV rays, extending the lifespan of the surface.
- Water-Based: Environmentally friendly and easy to clean up with water.
- Versatile Application: Suitable for a variety of cementitious and masonry surfaces, including concrete, brick, stone, stucco, slate, and flagstone.
- Ready to Use: No need for mixing or diluting; apply directly from the container.
- Outdoor-Approved: Designed for durability in exterior environments, with protection against weathering and wear.
Uses:
- Concrete Surfaces: Both colored and uncolored, stamped, or exposed aggregate.
- Masonry Surfaces: Includes porous brick, natural and manufactured stone, stucco, slate, and flagstone.
- Unglazed Tile: Can be applied to unglazed ceramic or porcelain tiles.
Dilution & Coverage:
- Ready to Use (RTU): Do not dilute or mix with other chemicals.
- Coverage: Approximately 500-1000 sqft per gallon, depending on surface porosity.
Product Specifications:
- Application: Spray on.
- Appearance: Milky.
- VOC: 5g/L (Compliant with various environmental regulations).
- Shelf Life: 1 year.
- Solvent: Water-based.
Preparation:
- Protection: Shield all non-intended surfaces and surrounding areas from product splash, over-spray, and wind drift using protective materials.
- Concrete Curing: New concrete must cure for at least 28 days before application.
- Surface Condition: Ensure surface is clean and free of contaminants like efflorescence, oil, dirt, and previous coatings. High moisture levels can affect performance.
Application:
- Sample Area: Test on a small area to ensure compatibility.
- Ambient Conditions: Apply between 55°F-80°F (12.8°C-26.7°C). Avoid application in rain, fog, or high humidity.
- Application Method: Use an Ameripolish® Sprayer with a conical mist tip (#8). Spray in circular motions from 18 inches away.
- Coats: Apply 2 coats for optimal wet look and performance. Foot traffic can resume after 2-4 hours; heavy traffic may require 24 hours.
Storage:
- Conditions: Store in a dry place at 40-110°F (4-43°C). Keep out of freezing temperatures and away from children. Seal container after use.
VOC Compliance:
- Regulations: Meets VOC regulations from the US EPA, California Air Resources Board, SCM Districts, South Coast Air Quality Management District, Maricopa County, AZ, and Northeast Ozone Transport Commission.
