Product Description
Ameripolish® 3D Hybrid Silicate Densifier HSL is a high-performance floor treatment designed to enhance the strength and durability of concrete surfaces. This advanced formula integrates three different molecular sizes of silicates, ensuring deep penetration into even the most challenging floor caps. The result is a significantly improved surface that resists traffic wear, weathering, and enhances abrasion resistance, making it suitable for both new and aged concrete.
Key Features:
- Versatile Use: Ideal for new construction, existing concrete, and diamond pad burnishing specifications.
- Deep Penetration: Hardens concrete deep within the slab, increasing durability even after grinding.
- Color Protection: Contains UV stabilizers to protect colored surfaces from fading.
- Enhanced Appearance: Improves the polished color, gloss, and clarity of concrete.
- Stain Resistance: Incorporates stain-resistant chemicals to prevent stain penetration.
- Healthier Air Quality: Minimizes dust, promoting better indoor air quality.
- Superior Performance: Provides excellent stain resistance, especially when used in conjunction with SR²™ Sealer.
- Environmental Compliance: Odorless, non-flammable, VOC compliant, and helps reduce efflorescence and alkali-silica reaction (ASR).
Applications:
- Concrete Hardening: Suitable for hardening concrete surfaces and preparing them for high-gloss diamond polishing.
- Dye Locking: Locks in dyes for longer-lasting color.
- Stain and Scratch Resistance: Enhances resistance to staining and scratching.
- Coverage Extension: Extends the coverage rates of Ameripolish® SR²™.
Dilution & Coverage:
- Ready to Use: Ameripolish® 3D HSL is supplied as a ready-to-use product and should not be mixed with other products.
- Coverage Rate: Approximately 300-500 square feet per gallon (7.4-12.3 m² per liter).
Application Methods:
-
Polished Concrete Method:
- Grind using up to 200-grit resin or equivalent.
- Clean the surface with an automatic floor scrubber and allow to dry.
- Apply 3D HSL using a spray and Ameripolish® Microfiber Pad, keeping the surface wet for 15 minutes.
- Grind up to 400-grit resin bond or equivalent.
- Apply an optional additional light application if needed.
- Clean tools and unprotected areas with fresh water.
- Polish to the desired grit level and apply Ameripolish® SR²™ or 3D SP™ as per instructions.
-
High-Speed Burnisher Method:
- Auto scrub with clean water.
- Apply and spread densifier while maintaining a wet edge.
- Allow to dry and burnish with an 800-grit diamond impregnated pad.
- Apply a second layer of densifier and burnish with a 1500-grit pad.
- Finish with Ameripolish® SR²™ or 3D SP™ for enhanced protection and appearance.
Cleanup:
- Quickly wash up with soap and water.
Storage:
- Store upright in a safe, dry place between 40-100°F (4-38°C).
- Avoid freezing and keep out of reach of children.
- Seal the container after use and do not mix with other chemicals.
VOC Compliance:
Ameripolish® 3D HSL is VOC compliant with a low VOC content of 0 g/L and adheres to national, state, and district regulations, including those set by the US Environmental Protection Agency and the California Air Resources Board.
